Section 1: Chemical Product
and Company Information
|
PRODUCT |
|
|
NUMBER: |
CAL 551-102 |
|
NAME: |
CAL551-102 Primer/Sealer |
|
DESCRIPTION: |
100% solids Low
Viscosity Penetrant, Primer and Sealer |
|
MANUFACTURER |
|
EMERGENCY TELEPHONE NUMBERS |
|
Calicorp, Inc.
629 Tandy Court
Chico, Ca. 95973 |
|
Domestic: |
888.BATT.MAT |
|
|
International: |
530.228.8628 |
|
|
|
|
Section 2:
Composition/Information on Ingredients
|
COMPONENT |
% |
CAS # |
EXPOSURE LIMIT |
|
RESIN |
|
|
|
|
Novolac Resin |
20-50% |
28064-14-4 |
|
|
Bisphenol A |
40-70% |
25085-99-8 |
TLV PEL: none established |
|
HARDENER |
|
|
|
|
Polyamide |
40% or less |
68410-23-1 |
|
|
Polyamide Amine |
40% or less |
647-754-99-0 |
|
|
Modified Polyamine |
30% or less |
Trade Secret |
no established limit |
Section 3:
Hazards Identification
|
|
RESIN
|
HARDENER
|
|
Inhalation |
LC50 (rabbits): 6000
mg/kg |
LC50:
possible respiratory irritant if atomized |
|
Skin Contact |
LD50 (rabbits): 4000
mg/kg |
Possible irritant, dermatitis in extreme |
|
Eye Contact |
Irritating |
Severe irritant |
|
Ingestion |
LD50 (rabbits): 4000
mg/kg |
LD50
(rats): 3000 mg/kg |
|
Acute Overexposure |
Irritation, possible sensitization |
Irritation, possible sensitization, nausea |
|
Chronic Overexposure |
Skin sensitization, dermatitis |
Skin
sensitization, nausea, may be corrosive |
Section 4:
First Aid Measures
|
|
RESIN
|
HARDENER
|
|
Ingestion |
If large amounts are ingested, induce
vomiting if conscious. |
Call
physician immediately.
Give
generous amounts of water if conscious.
Do
not induce vomiting. |
|
Eyes |
Immediately flush eyes with water for 15 minutes. Call physician. |
|
Skin |
Promptly wash with mild soap and water. |
|
Inhalation |
Remove to fresh air. Give oxygen if breathing is difficult. |
Section 5:
Fire Fighting Measures
|
|
RESIN
|
HARDENER
|
|
Flash Point |
> 300o F (149o C) |
> 200o F (93o C) |
|
Extinguishing Media |
Carbon Dioxide, foam, dry chemical |
|
Special
Procedures |
Use a self-contained breathing
apparatus. |
|
NOTE: decomposition and
combustion products may be toxic |
Section 6:
Accident Release Measures
|
|
RESIN
|
HARDENER
|
|
Steps to be taken if material is spilled |
Shovel into closeable container for
disposal. |
Absorb into sand or other absorbent material. Shovel into closeable
container and dispose of in professional manner. |
|
|
|
Contains no VOCs. No special procedures
are needed for accidental release containment and clean-up. |
Section 7:
Handling and Storage
|
HANDLING: |
Avoid contact with skin and eyes. Keep container tightly
closed. Avoid freezing or extreme heat. |
|
STORAGE: |
Normal warehouse
storage conditions acceptable. |
Section 8:
Exposure Controls/Personal Protection
|
Ventilation Requirements |
Good general mechanical ventilation and
local exhaust |
|
Specific Personal Protective Equipment |
Organic chemical cartridge respirator if
needed in non-vented area |
|
Eyes |
Splash-proof chemical goggles |
|
Gloves |
Impervious gloves |
|
Other |
Appropriate equipment to prevent
probability of skin and eye contact. |
Section 9:
Physical and Chemical Properties
|
|
|
RESIN
|
HARDENER
|
|
Specific Gravity |
1.08 |
0.93 |
|
|
% Volatiles by volume |
Nil |
< .5% |
|
|
Appearance/Odor |
Light Amber |
Brown/Slight sweet odor |
|
|
Melting Point |
< 0 degrees F (-18o
C) |
< 0 degrees F (-18o C) |
|
|
Solubility in Water
(% by weight) |
Negligible |
Negligible |
|
|
pH |
ca 5 |
ca 10 |
|
|
|
|
|
|
Section 10:
Stability and Reactivity
|
|
RESIN
|
HARDENER
|
|
Conditions contributing to instability |
Stable |
Do
not heat in bulk as
dangerous decomposition may occur, liberating toxic fumes. |
|
Hazardous Decomposition Products |
Carbon Monoxide, Carbon Dioxide,
Phenolics |
Carbon Monoxide, Carbon Dioxide, Phenolic Nitrogen Oxides and
Compounds |
|
Conditions Contributing to Hazardous
Polymerization |
Will not occur |
Heating in bulk |
|
|
|
|
Incompatibility |
Strong oxidizers, strong acids and bases |
Section 11:
Toxicological Information
A skin and eye irritant. Moderately toxic by ingestion and skin contact.
|
COMPONENT |
SAX TOXICITY
EVALUATION |
|
Novolac Resin |
Not listed by NTP |
|
Bisphenol A |
Poison by intraperitoneal route. Moderately toxic by ingestion
and skin contact.
A skin and eye irritant. |
|
Polyamide |
MODERATE via oral, intraperitoneal, subcutaneous and dermal routes.
SEVERE rabbit eye irritant and MILD rabbit
skin irritant. |
|
Polyamido Amine |
Not listed by NTP. |
|
Modified Polyamine |
Moderately toxic by ingestion. Mildly toxic by skin contact.
An eye irritant. |
Section 12:
Ecological Information
This
product is not considered a hazardous waste under the RCRA.
Section 13:
Disposal Considerations
|
|
RESIN
|
HARDENER
|
|
Aquatic Toxicity |
Not available at this time |
Not
available at this time |
|
|
|
|
Waste Disposal Method |
Not considered hazardous under RCRA
(40CFR 261) Dispose according to state, federal and local regulations. |
Section 14:
Transport Information
This product is not DOT
regulated and is not considered a hazardous waste under the RCRA.
Section 15:
Regulatory Information
|
OSHA:
None. |
|
ACGIH:
None. |
|
NIOSH Criterion Document:
None. |
NFPA Hazard Rating: Health (H): None. Flammability (F): None. Reactivity (R): None
|
Section 16:
Other Information
OSHA
Occupational Safety and
Health
ACGIH
American Conference of
Governmental Industrial Hygienists
NIOSH
National Institute for
Occupational Safety and Health
NFPA
National Fire Protection Association
NTP
National Toxicology Program
