Section 1: Chemical Product and Company Information
|
PRODUCT |
|
|
NUMBER: |
CAL551-220 |
|
NAME: |
CAL551-220 Novolac Surface Coating |
|
DESCRIPTION: |
Hybrid Novolac Industrial Maintenance Coating for Metal and Concrete
Substrates |
|
MANUFACTURER |
|
EMERGENCY TELEPHONE NUMBERS |
|
Calicorp, Inc.
629 Tandy Court
Chico,
Ca. 95973 |
|
Domestic: |
888.BATT.MAT |
|
|
International: |
530.228.8628 |
|
|
|
|
Section 2:
Composition/Information on Ingredients
|
COMPONENT |
% |
CAS # |
EXPOSURE LIMIT |
|
RESIN |
|
|
|
|
Novolac Resin |
10-40% |
28064-14-4 |
|
|
Water |
11-30% |
7732-18-5 |
|
|
HARDENER |
|
|
|
|
Propanamine
|
30% or less |
919-30-4
|
|
|
Modified Polyamine |
90% or less |
Trade Secret |
no established
limit |
Section 3: Hazards
Identification
|
|
RESIN
|
HARDENER
|
|
Inhalation |
LC50 (rabbits): 6000
mg/kg |
LC50: possible
respiratory irritant if atomized |
|
Skin Contact |
LD50 (rabbits): 4000
mg/kg |
Possible irritant, dermatitis in
extreme |
|
Eye Contact |
Irritating |
Severe irritant |
|
Ingestion |
LD50 (rabbits): 4000
mg/kg |
LD50 (rats): 3000
mg/kg |
|
Acute Overexposure |
Irritation, possible sensitization |
Irritation, possible sensitization,
nausea |
|
Chronic Overexposure |
Skin sensitization, dermatitis |
Skin sensitization, nausea, may be
corrosive |
Section 4: First Aid
Measures
|
|
RESIN
|
HARDENER
|
|
Ingestion |
If large amounts are ingested, induce
vomiting if conscious. |
Call physician immediately.
Give generous amounts of water if
conscious.
Do not
induce vomiting. |
|
Eyes |
Immediately flush eyes with water for
15 minutes. Call physician. |
|
Skin |
Promptly wash with mild soap and water. |
|
Inhalation |
Remove to fresh air. Give oxygen if
breathing is difficult. |
Section 5: Fire Fighting
Measures
|
|
RESIN
|
HARDENER
|
|
Flash Point |
> 300o F (149o C) |
> 200o F (93o C) |
|
Extinguishing Media |
Carbon Dioxide, foam, dry chemical |
|
Special
Procedures |
Use a self-contained breathing
apparatus. |
|
NOTE:
decomposition and combustion products
may be toxic |
Section 6: Accident Release
Measures
|
|
RESIN
|
HARDENER
|
|
Steps to be taken if material is
spilled |
Shovel into closeable container for
disposal. |
Absorb into sand or other absorbent
material. Shovel into closeable container and dispose of in
professional manner. |
|
|
|
Contains no VOCs. No special procedures
are needed for accidental release containment and clean-up. |
Section 7: Handling and
Storage
|
HANDLING: |
Avoid contact with
skin and eyes. Keep container tightly closed. Avoid freezing or
extreme heat. |
|
STORAGE: |
Normal warehouse
storage conditions acceptable. |
Section 8: Exposure
Controls/Personal Protection
|
Ventilation Requirements |
Good general mechanical ventilation and
local exhaust |
|
Specific Personal Protective Equipment |
Organic chemical cartridge respirator
if needed in non-vented area |
|
Eyes |
Splash-proof chemical goggles |
|
Gloves |
Impervious gloves |
|
Other |
Appropriate equipment to prevent
probability of skin and eye contact. |
Section 9: Physical and
Chemical Properties
|
|
|
RESIN
|
HARDENER
|
|
Specific Gravity |
1.56 |
1.06 |
|
|
% Volatiles by volume |
Nil |
< 0.5% |
|
|
Appearance/Odor |
Light Gray |
Brown/Slight sweet odor |
|
|
Melting Point |
< 0 degrees F (-18o
C) |
< 0 degrees F (-18o
C) |
|
|
Solubility in Water
(% by weight) |
Negligible |
Negligible |
|
|
pH |
ca 5 |
ca 10 |
|
|
|
|
|
|
Section 10: Stability and
Reactivity
|
|
RESIN
|
HARDENER
|
|
Conditions contributing to instability |
Stable |
Do not
heat in bulk as dangerous decomposition may occur, liberating toxic
fumes. |
|
Hazardous Decomposition Products |
Carbon Monoxide, Carbon Dioxide,
Phenolics |
Carbon Monoxide, Carbon Dioxide,
Phenolic Nitrogen Oxides and Compounds |
|
Conditions Contributing to Hazardous
Polymerization |
Will not occur |
Heating in bulk |
|
|
|
|
Incompatibility |
Strong oxidizers, strong acids and
bases |
|
Special Precautions |
Do not
heat in bulk; dangerous decomposition may occur, liberating toxic
fumes. |
Section 11: Toxicological
Information
A skin and eye irritant. Moderately toxic by ingestion and skin contact.
|
COMPONENT |
SAX TOXICITY
EVALUATION |
|
Novolac Resin |
Not listed by NTP |
|
Propanamine |
THR: Not available
|
|
Modified Polyamine |
Moderately toxic by
ingestion. Mildly toxic by skin contact. An eye irritant. |
|
|
|
|
This chemical
may cause irritation. When heated to decomposition it emits
toxic fumes of carbon monoxide, carbon dioxide, nitrogen oxides and
hydrogen chloride gas. |
Section 12: Ecological
Information
This product is not considered a hazardous waste under the RCRA.
Section 13: Disposal Considerations
|
|
RESIN
|
HARDENER
|
|
Aquatic Toxicity |
Not available at this time |
Not available at this time |
|
|
|
|
Waste Disposal Method |
Not considered hazardous under RCRA
(40CFR 261) Dispose according to state, federal and local regulations. |
Section 14: Transport
Information
This product is not
DOT regulated and is not considered a hazardous waste under the RCRA.
Section 15: Regulatory
Information
|
OSHA:
None. |
|
ACGIH:
None. |
|
NIOSH Criterion Document:
None. |
NFPA Hazard Rating: Health (H): None. Flammability (F): None. Reactivity (R): None
|
Section 16: Other
Information
OSHA
Occupational Safety
and Health
ACGIH
American Conference of
Governmental Industrial Hygienists
NIOSH
National Institute for
Occupational Safety and Health
NFPA
National Fire Protection Association
NTP
National Toxicology Program
